Inquiry Basket (
Product List (Total 100 Products)
The RCD is in conformity with the standards of IEC1008, GB16916 and BS EN61008. The RCD can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage ...
Last Updated: 2009-03-06
The Residual Current Device (RCD) HKKF1 is in conformity with the standards of IEC1008, VDE 0664, CEE27 and BS4293.
It can cut off the fault circuit immediately on the ...
Last Updated: 2009-03-06
The RCD is in conformity with the standards of IEC1008, GB16916 and BS EN61008. The RCD can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage ...
Last Updated: 2009-03-06
Safety terminal:
Easy wiring
No wrong fixing
Protection degree Ip20.
Pozidriv and slot screw head.
Torque up to 4.5 N. M.
Incoming/outgoing terminal capacity up to ...
Last Updated: 2009-03-06
The Modular Signal Lamp is applicable to circuit with rated voltage 230V~ and frequency 50/60Hz for visual indication and signaling
Low service duration, minimum power ...
Last Updated: 2009-03-06
The HKKC60NL RCCB incorporates a residual current operated electromagnetic release which operates without any auxiliary source of supply to open a circuit automatically in the ...
Last Updated: 2009-03-06
Intelligent controller is one of the core components of the circuit breaker
1) properties of the intelligent controller
A. Protective function of over-load by long time-delay ...
Last Updated: 2009-03-06
It is suitable for ships and land, in the circuit with AC 50 or 60 Hz, rated insulation voltage 660V, DC voltage 250V or less, rated current from 3A to 1200A. Used as making and ...
Last Updated: 2009-03-06
FKR1-500 type digital display motor soft starter adopts 16 bits MPU as the core to control high power controllable silicon module, and realize soft starting and soft stopping of ...
Last Updated: 2009-03-06
CJX2C series AC. Contactor is suitable for using in the circuits up to the rated voltage 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & ...
Last Updated: 2009-03-06
